THE FLOW OVER ASYMMETRICAL RIPPLES: EXPERIMENTAL INVESTIGATION ON THE MORPHODYNAMIC BEHAVIOR
ICCE 2016 Cover Image
PDF

Keywords

ripple evolution
asymmetric waves
migration velocity

How to Cite

Faraci, C., Petrotta, C., Scandura, P., Foti, E., & Blondeaux, P. (2017). THE FLOW OVER ASYMMETRICAL RIPPLES: EXPERIMENTAL INVESTIGATION ON THE MORPHODYNAMIC BEHAVIOR. Coastal Engineering Proceedings, 1(35), sediment.35. https://doi.org/10.9753/icce.v35.sediment.35

Abstract

This paper reports on an experimental campaign focused on the generation and evolution of small scale bedforms over a sloping sandy beach. The wave propagation over a sloping bed triggers a flow asymmetry that reflects on the bedform characteristics. Morphodynamic analyses on ripple evolution and migration led to observe that at the equilibrium the ripples have larger offshore flanks and are leant toward the beach. However migration velocity may be onshore or offshore directed. The equilibrium ripple characteristics seem to be well described by Nielsen (1981) ripple predictor.
https://doi.org/10.9753/icce.v35.sediment.35
PDF

References

Blondeaux, P., 2001. Mechanics of coastal forms. Annu. Rev. Fluid Mech. 33, 339- 370.

Blondeaux P., Foti E., Vittori G. (2000) Migrating sea ripples. Eur. J. Mech. B - Fluids 19, 285-301.

Camenen, B. (2009) Estimation of the wave-related ripple characteristics and induced bed shear stress. Estuarine, Coastal and Shelf Science, 84 (4), 553-564.

Doucette, J. S. And O'Donoghue, T. (2006), Response of sand ripples to change in oscillatory flow. Sedimentology, 53: 581-596. doi:10.1111/j.1365-3091.2006.00774.x

Faraci, C. and Foti, E. (2002) Geometry, migration and evolution of small-scale bedforms generated by regular and irregular waves. Coast. Engng., 47, 35-52.

Faraci, C., Foti, E., Marini A., Scandura, P., (2012). Waves Plus Currents Crossing at a Right Angle: Sandpit Case J. Waterway, Port, Coast. and Ocean Eng., 138(5).

Faraci, C., Scandura, P., and Foti, E. (2015). Reflection of sea waves by combined caissons. J. Waterway, Port, Coast. and Ocean Eng., 141(2).

Grasmeijer, B.T. and Kleinhans, M.G.( 2004) Observed and predicted bed forms and their effect on suspended sand concentrations. Coast. Engng., 51(5), 351-371.

Hurther D. and Thorne P. (2011) Suspension and near bed load sediment transport processes above a migrating, sand rippled bed under shoaling waves J. Of Geophys. Res., 116, C07001

Liu, Y. and Faraci, C. (2014). Analysis of orthogonal wave reflection by a caisson with open front chamber filled with sloping rubble mound. Coast. Engng., 91:151-163.

Mansard, E. P. D., and Funke, E. R. (1980). The measurement of incident and reflected spectra using a least squares method. Proc., 17th Int. Coastal Engineering Conf., ASCE, New York, 154-172.

Mogridge, G.R., Davies, M.H. and Willis, D.H. (1994) Geometry prediction for wave-generated bedforms. Coast. Engng., 22, 255-286.

Nielsen, P., 1981. Dynamics and geometry of wave-generated ripples. J. Geophys. Res. 86 (C7), 6467- 6472.

Nielsen, P., 1992. Coastal bottom boundary layers and sediment transport. World Sci.

Sato, S. and K. Horikawa: Laboratory study on sand transport due to asymmetric oscillatory flows, Proc. 20th Conf. on Coastal Eng., pp. 1481-1495, 1986.

Scandura, P., Faraci, C.,and Foti, E. (2016). A numerical investigation of acceleration-skewed oscillatory flows J. Fluid Mech. 808, 576-613.

Sleath, J.F.A., 1984. Sea bed mechanics. In: M.E. McCormic (Ed.), Wiley Ocean Engineering Series, Wiley, New York.

van der Werf, J. J., Doucette, J. S., O'Donoghue, T., and Ribberink, J. S. (2007): Detailed measurements of velocities and suspended sand concentrations over full-scale ripples in regular oscillatory flow, J. Geophys. Res., 112, F02012

Van Rijn, L.C. (1993) Principles of sediment transport in rivers, estuaries and coastal seas. Aqua Publications. Vol. 1006.

Wiberg, P.L. and Harris, C.K. (1994) Ripple geometry in wave-dominated environments. J. Geophys. Res., 99(C1), 775-789.

Authors retain copyright and grant the Proceedings right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this Proceedings.