CHARACTERISATION OF BREAKING WAVES ON THE EDDYSTONE LIGHTHOUSE: A LABORATORY INVESTIGATION ON WAVE PRESSURE

Davide Banfi, Alison Raby, David Simmonds

Abstract


Commonly, rock lighthouses are erected on the top of steep reefs and in limited water depths. The effect of these environmental conditions on wave loading requires deeper understanding. This paper investigates wave loading at small scale for a particular case study: the Eddystone lighthouse (UK). Load characteristics due to breaking waves are obtained by the use of pressure transducers and the test program is designed to generate a comprehensive data set covering a broader range of wave conditions. Although the magnitude of wave pressures is rather random from wave to wave of the same train of regular waves, the pressure impulsivity tends to decrease with increasing relative breaking distance. Four breaker types are described and particular attention is given to time histories of the line of action of horizontal force and vertical spatial distributions. Estimation of overall forces, obtained by pressure integration, indicates that the wave loading is strongly affected by the limited water depth condition. In fact, only small plunging waves are able to break at the structure; thus, they cause small forces despite the small breaking distances. Finally, the occurrence of the breakers is investigated on a dimensionless plane given by the combination of the Iribarren number and momentum flux of Hughes.

Keywords


Eddystone lighthouse; limited water depth; breaking waves; wave load; spatial load distributions; breaking map

Full Text:

PDF

References


Bagnold, M.R.A. 1939. Interim report on wave-pressure research. Proc. Inst. Civ. Engrs, 12, 201–226.

Battjes, J.A. 1974. Surf similarity. Proceedings 14th Coastal Engineering Conference. ASCE, New York, N.Y., 466-480.

Blenkinsopp, C. E., and J. R. Chaplin. 2011. Void fraction measurements and scale effects in breaking waves in fresh water and sea water. Coastal Engineering, 58(5), 417-428.

Bredmose, H., D.H. Peregrine, and G.N Bullock. 2009. Violent breaking wave impacts. Part 2: modelling the effect of air. Journal of Fluid Mechanics, 641, 389-430.

Bredmose, H., G.N. Bullock, and A.J. Hogg. 2015. Violent breaking wave impacts. Part 3. Effects of scale and aeration. Journal of Fluid Mechanics, 765, 82-113.

Bullock, G.N., A.R. Crawford, P.J. Hewson, M.J.A. Walkden, and P.A.D. Bird. 2001. The influence of air and scale on wave impact pressures. Coastal Engineering, 42(4), 291-312.

Bullock, G., C. Obhrai, G. Müller, G.Wolters, H. Peregrine, and H. Bredmose. 2003. Field and laboratory measurements of wave impacts. In Proc. Coastal Structures (pp. 343-355).

Bullock, G.N., C. Obhrai, D.H. Peregrine, and H. Bredmose. 2007. Violent breaking wave impacts. Part 1: Results from large-scale regular wave tests on vertical and sloping walls. Coastal Engineering, 54(8), 602-617.

Cuomo, G., W. Allsop, and S. Takahashi. 2010. Scaling wave impact pressures on vertical walls. Coastal Engineering, 57(6), 604-609.

Cuomo, G., R. Piscopia, and W. Allsop. 2011. Evaluation of wave impact loads on caisson breakwaters based on joint probability of impact maxima and rise times. Coastal Engineering, 58(1), 9-27.

Galvin, C. J. 1968. Breaker type classification on three laboratory beaches. Journal of geophysical research, 73(12), 3651-3659.

Goda, Y. 1974. New wave pressure formulae for composite breakwaters. Proc. 14th International Conference on Coastal Engineering, pp 1702-1720, Copenhagen, publn. ASCE, New York.

Hattori, M., A. Arami, and T. Yui. 1994. Wave impact pressure on vertical walls under breaking waves of various types. Coastal Engineering, 22(1), 79-114.

Hughes, S. A. 2005. Wave momentum flux parameter: a descriptor for nearshore waves. Coastal Engineering, 51(11), 1067-1084.

Hull, P., and G. Müller. 2002. An investigation of breaker heights, shapes and pressures. Ocean Engineering, 29(1), 59-79.

Kyte, A., and A. Tørum. 1996. Wave forces on vertical cylinders upon shoals. Coastal engineering, 27(3), 263-286.

Muttray, M., H. Oumeraci, K. Shimosako, and S. Takahashi. (1998). Hydraulic performance of a high mound composite breakwater. Coastal Engineering Proceedings, 1(26).

Oumeraci, H., P. Klammer, H.W. Partenscky. 1993. Classification of breaking wave impact loads on vertical structures. ASCE, J. Waterway, Port, Coastal and Ocean Eng., 119(4), 381-397.

Raby, A., G. Bullock, D. Banfi, Y. Rafiq, and F. Cali. 2015. Wave loading on rock lighthouses. In Proceedings of the Institution of Civil Engineers-Maritime Engineering, Vol. 169, No. 1, pp. 15-28. Thomas Telford Ltd.

Trinh, Q., A. Raby, D. Banfi, M. Corrado, B. Chiaia, Y. Rafiq, and F. Cali. 2016. Modelling the Eddystone Lighthouse response to wave loading. Engineering Structures, 125, 566-578.

Weggel, J. R. 1972. Maximum breaker height for design. Coastal Engineering Proceedings, 1(13).

Wienke, J., and H. Oumeraci. 2005. Breaking wave impact force on a vertical and inclined slender pile – theoretical and large-scale model investigations. Coastal Engineering, 52(5), 435-462.




DOI: https://doi.org/10.9753/icce.v35.structures.15