Nannina Horstmann, Kerstin Hinze, Stefan Schimmels, Hocine Oumeraci


A risk-based strategy for monitoring, inspection and maintenance (MIM) is described as a key component of an overall framework for life-cycle engineering and management. Its application for coastal structures is exemplarily outlined for sea/estuary dikes and harbor quay walls. The necessity of the incorporation of pre-existing damages into this strategy is exemplarily illustrated for quay walls, showing how this will affect the failure probability in comparison to a quay wall without any pre-existing damages.


sea dikes; estuary dikes; weak spots; initial damages; failure probability; fault tree analysis

Full Text:



Akkerman, G. J.; van Gerven, K. A. J.; Schaap, H. A.; van der Meer, J. W. 2007. Workpackage 3: Development of Alternative Overtopping-resistant Sea defences – Phase 3: Wave overtopping erosion tests at Groningen Sea Dyke. ComCoast. Final Report. Delft. The Netherlands.

Allsop, W.; Kortenhaus. A.; Morris, M. 2007. Failure mechanisms for flood defence structures. Project FLOODsite 2002-2006. Report T04-06-01.

Bakker, W.T.; Vrijling, J.K. 1980. Probabilistic design of sea defences. Proceedings 17th International Conference Coastal Engineering (ICCE), Sydney, 23-28 March 1980: 2040-2059. ASCE.

Buijs, F. 2008. Qualitative and quantitative reliability analysis of holes in embankments. Project FLOODsite 2002-2006. Report T04-09-02.

CUR. 2005. Handbook of quay walls. Taylor & Francis Group. Balkema. Rotterdam.

CUR 166. 1997. Damwandconstructies. CUR-publicatie 166. Gouda. The Netherlands.

DIN 18800. Stahlbauten - Teil 1: Bemessung und Konstruktion. Beuth Verlag. Germany (in german).

Hijum, v. E. 1998. Aspects of execution and management. In K. W. Pilarczyk (ed), Dikes and Revetments - Design, Maintenance and Safety Assessment. Balkema. Rotterdam. pp 489-522.

Horstmann, N. 2010. Konzeptionelle Entwicklung von Ansätzen für ein Lebensdauermanagementsystem von Hafeninfrastrukturen. Diploma thesis. Franzius-Institute for Hydraulic, Waterways and Coastal Engineering. Leibniz University of Hannover. Germany. (in german, unpublished).

Horstmann, N.; Schimmels S.; Oumeraci, H. 2012. A risk-based strategy for monitoring, inspection and maintenance of coastal protection structures as an integral part of life cycle calculation and optimization processes. State-of-the-Art report. Coastal Research Center, Joint Central Institution of the Leibniz Universität Hannover and the Technische Universität Braunschweig, Germany (in preparation).

Kortenhaus, A. 2003. Probabilistische Methoden für Nordseedeiche. Ph.D. thesis. Leichtweiß-Institute for Hydraulic Engineering and Water Resources. Braunschweig. Germany (in German).

Krishnasamy et al. 2005. Development of a risk-based maintenance (RBM) strategy for a power-generating plant. Journal of Loss Prevention in the Process Industries. Guildford. Butterworth. pp 69-81.

Kuijper, H. & Vrijling, J.K. 1998. Probabilistic approach and risk analysis. K. W. Pilarczyk (ed). Dikes and Revetments - Design, Maintenance and Safety Assessment. Balkema. .Rotterdam. The Netherlands. pp 443-462.

Naulin, N.; Hinze, K.; Oumeraci, H.; Kortenhaus, A. 2012. Reliability Analysis of Grass-Covered Sea and Estuary Dikes Focusing on Time-Dependent Failure Mechanisms and Failure Modes. State-of-the-Art report. Leichtweiß-Institute for Hydraulic Engineering and Water Resources. Braunschweig. Germany (in preparation).

NEN 6700. 1990. Technical principles for buildings structures – TGB 1990 – General principles. Delft. The Netherlands. (in dutch).

NEN 6702. 1990. Technical principles for buildings structures – TGB 1990 – Loadings and deformation. Delft. The Netherlands. (in dutch).

Nowak. A. S. and Collins, K. R. 2000. Reliability of structures. McGraw-Hill Companies. Boston. USA.

Oumeraci, H. 2004. Sustainable coastal flood defences: scientific and modelling challenges towards an integrated risk-based design concept. Keynote lecture. Proc. First IMA International Conference on Flood Risk Assessment. Southend on Sea: IMA. pp 9-24

Oumeraci, H.; Kortenhaus, A.; Allsop, W.; de Groot, M.; Crouch, R.; Vrijling, H.; Voortman, H. 2001. Probabilistic design tools for vertical breakwater. Swets & Zeitlinger B.V. Lisse. The Netherlands.

Pianc. 2001. Seismic Design Guidelines for Port Structures. Working Group No. 34 (WG 34) of the Maritime Navigation Commission (InCom). Lisse [u.a.]: Balkema.

Schießl, P. 2007. Lebensdauermanagementsystem – Teilprojekt A2. In Deutscher Ausschuss für Stahlbeton (ed), Schlussbericht zur ersten Phase des DAfStb/BMBF-Verbundforschungsvorhaben - Nachhaltiges Bauen mit Beton. Berlin: Beuth Verlag GmbH. (in German).

Stanczak, G. & Geisenhainer, P. 2007. Weak spots in grass and clay cover of sea dikes as potential locations of breach initiation. Technical Note. Leichtweiss-Institute for Hydraulic Engineering and Water Resources. Braunschweig. Germany.

Stanczak, G.; Oumeraci, H. 2012a. Modeling sea dike breaching induced by breaking wave impact laboratory experiments and computational model. Coastal Engineering. Vol. 59. No. 1. Amsterdam. The Netherlands. pp 28-37.

Stanczak, G.; Oumeraci, H. 2012b. Model for prediction of sea dike breaching initiated by breaking wave impact. Journal of Natural Hazards. Vol. 61. No. 2. pp 673-687.http://dx.doi.org/10.1007/s11069-011-0054-8

Takahashi et al. 2001. Performance Design for Maritime Structures and Its Application to Vertical Breakwaters – Caisson Sliding and Deformation-Based Reliability Design. Proc. of International Workshop on Advanced Design of Maritime Structures in the 21st century (ADM21), Yokosuka, 5-7 March 2001. PHRI. pp 63-73.

Tuan, T.Q.; Oumeraci, H. 2012. Modelling of wave overtopping-induced erosion of grassed inner sea-dike slopes. Natural Hazards. Springer (31 March 2012). pp 1-31.

Vrijling, J. K. 1984. Some considerations of an acceptable level of risk in the Netherlands. Technical Advisory Committee for Dykes and Flood Defences – Working Group 10. Delft. The Netherlands.

DOI: https://doi.org/10.9753/icce.v33.structures.57