Gisa Foyer, Hocine Oumeraci


Wave set-up is generally considered for the stability analysis of beaches, but not or not explicitly for the design of revetments. Based on large-scale model results with regular and irregular waves, it is shown in this paper that this is not justified. For this purpose, the wave set-up on a porous bonded revetment and the related internal set-up in the sand foundation below the revetment are analysed for different breaker types. The results particularly show that (i) considerable set-up values are obtained for almost all breaker types, (ii) a good correlation exists with the deep water wave length for both external and internal set-up and (iii) the internal set-up is significantly affected by the wave set-up on the slope. Empirical formulae for the prediction of the external and internal set-up are also proposed for both regular and irregular waves.


porous bonded revetment; wave set-up; wave set-down; internal set-up; breaker types

Full Text:



Barends, F.; van Hoven, A. 2007. Internal setup in porous dams and dikes, Proceedings of the 14th European Conference on Soil Mechanics and Geotechnical Engineering, pp. pp. 821-826.

Hanslow, D.; Nielsen, P. 1993. Shoreline Set-Up on Natural Beaches, Journal of Coastal Research, pp. 1–10.

Longuet-Higgins, M. S.; Stewart, R. w. 1964. Radiation stresses in water waves; a physical discussion, with applications, Deep Sea Research and Oceanographic Abstracts, 11, pp. pp. 529-562.

Losada, I. J.; Dalrymple, R. A.; Losada, M. A. 1998. Wave-induced mean flows in vertical rubble mound structures, Coastal Engineering, 35, pp. 251–281.http://dx.doi.org/10.1016/S0378-3839(98)00041-6

Losada, I. J.; Lara, J. L.; Guanche, R.; Gonzalez-Ondina, J. M. 2008. Numerical analysis of wave overtopping of rubble mound breakwaters, Coastal Engineering, 55, pp. 47–62.http://dx.doi.org/10.1016/j.coastaleng.2007.06.003

Ludwigs, G.; Oumeraci, H. 2011. Dynamic response of PBA revetments and subsoil to wave loads, Coastal Structures, Yokohama, Japan (In print).

Ludwigs, G.; Oumeraci, H.; Staal, T. 2010. Wave loads on and beneath bonded permeable revetments (Poster), 32nd International Conference on Coastal Engineering, Shanghai, China.


Oumeraci, H.; Staal, T.; Pfoertner, S.; Kudella, M.; Schimmels, S.; Verhagen, H. 2010a. Hydraulic performance of elastomeric bonded permeable revetments and subsoil response to wave loads, 32nd International Conference on Coastal Engineering, Shanghai, China.

Oumeraci, H.; Staal, T.; Pfoertner, S.; Ludwigs, G.; Kudella, M. 2010b. Hydraulic performance, wave loading and response of Elastocoast revetments and their foundation - A large scale model study -. Braunschweig, Germany (Berichte Leichtweiß-Institut für Wasserbau, Technische Universität Braunschweig).

Oumeraci, H.; Staal, T.; Pförtner, S.; Ludwigs, G. 2012. Hydraulic performance, wave loading and response of PBA revetments and their foundations, European Journal of Environmental and Civil Engineering - Special Issue.

PMid:22970211 PMCid:3435306

Stockdon, H. F.; Holman, R. A.; Howd, P. A.; Sallenger, A. H., JR. 2006. Empirical parameterization of setup, swash, and runup, Coastal Engineering, 53, pp. 573–588.http://dx.doi.org/10.1016/j.coastaleng.2005.12.005

DOI: https://doi.org/10.9753/icce.v33.structures.27