VALIDITY OF SIMPLIFIED ANALYSIS OF STABILITY OF CAISSON BREAKWATERS ON RUBBLE FOUNDATION EXPOSED TO IMPULSIVE LOADS

Lars Andersen, Hans Falk Burcharth, Thomas Lykke Andersen

Abstract


Wave slamming on vertical breakwaters cause a sudden, impulsive load that may cause a caisson to slide on its foundation. Alternatively, geotechnical failure may occur in the subsoil. This paper investigates whether simple analytical solutions, accounting only for the sliding along the caisson–foundation interface, can be utilized to properly determine the deformations of the breakwater. Comparisons are made with results obtained by numerical models that include the material response of the soil. Firstly, a computational model is suggested that assumes a fully drained behavior of the subsoil. Secondly, a fully coupled dynamic pore-water-flow model is introduced. The computational examples clearly demonstrate that the deformations of the soil as well as the pore pressures must be
accounted for in order to get a reliable prediction of caisson deformations during wave impact.

Keywords


caisson breakwater; wave impact; dynamic pore pressure; geotechnical failure

References


Barquín, G.G. 1998. Dynamic analysis of a vertical breakwater—extension to the Escombreras Basin Port of Cartagena, Spain, Madrid.

Burcharth, H.F., L. Andersen and T. Lykke Andersen. 2009. Analyses of stability of caisson breakwaters on rubble foundation exposed to impulsive loads, Proceedings of the 31st International Conference on Coastal Engineering, World Scientific, 3606–3618.

Burcharth, H.F., T. Lykke Andersen and P. Meinert. 2008. The Importance of Pressure Sampling Frequency in Models for Determination of Critical Wave Loadings on Monolithic Structures, Proceedings of COPEDEC VII, Dubai, UAE.

Goda, Y. 1974. A new method of wave pressure calculation for the design of composite breakwaters, Proceedings of the 14th International Conference on Coastal Engineering, 1702–1720.

Hur, D.-S., C.-H. Kim and J.-S. Yoon. 2010. Numerical study on the interaction among a nonlinear wave, composite breakwater and sandy seabed, Coastal Engineering, 57, 917–930.http://dx.doi.org/10.1016/j.coastaleng.2010.05.010

Itasca. 2006. FLAC3D – Fast Lagrangian Analysis of Continua in 3 Dimensions – User's Guide, Itasca Consulting Group, Inc., Minneapolis, Minnesota USA.

Kudella, M. and H. Oumeraci. 2009. Experimental and numerical study of the response of a sandbed beneath a caisson breakwater subject to cyclic wave load, Proceedings of the 31st International Conference on Coastal Engineering, World Scientific, 3619–3631.

Simulia. 2009. ABAQUS Version 6.9 Documentation, Dassault Systèmes Simulia Corp., Providence, RI, USA.

Takahashi, S., K. Tanimoto and K. Shimosako. 1994. A proposal of impulsive pressure coefficient for the design of composite breakwaters, Proceedings of the International Conference on Hydro-Technical Engineering for Port and Harbour Construction, Yokosuka, Japan, 438–457.


Full Text: PDF

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.